Q: How do I fix my multi-handle kitchen, lavatory and roman tub faucet if it is leaking?

At the End of the Spout

  1. Ensure the water supply to the faucet is turned off.
  2. Replace cartridge(s) (see FAQ 48).

At the Handle

  1. Check the bonnet nut to ensure it is fully tightened. If problem still exists, move to Step 2.
  2. Ensure the water supply to the faucet is turned off.
  3. Replace cartridge(s) (see FAQ 48).

At the Swivel Spout Base

  1. Ensure the water supply to the faucet is turned off.
  2. Replace the spout O-rings.

At Hose Connections/Supply Lines

FAQ77

Snap-Connect Connection

  1. Ensure the connection(s) are secure. If problem still exists, move to Step 2.
  2. Ensure the water supply to the faucet is turned off.
  3. Replace the Snap-Connect block and/or O-rings as applicable (see FAQ 6).

Screw Connection

  1. Ensure the connection(s) are secure. If problem still exists, move to Step 2.
  2. Ensure the water supply to the faucet is turned off.
  3. Replace the hose and O-rings.

From the Valve Body

Contact Customer Service at 866-745-4010 or fill out the form on the Support tab of www.premierfaucet.com.